Cumulus Coffee logo
Cumulus Coffee logo

All articles

What is a Cleaning Cycle and how do I start it?Updated a month ago

The Cleaning Cycle uses Cumulus cleaning solution to remove internal build-up, keeping your machine in optimal condition.

To run a Cleaning Cycle, follow these steps:

  1. Place a cleaning capsule or empty capsule into the capsule holder.
  2. Remove and empty the water tank, then place the tank (or a household container which can hold more than 32 oz.) under the nozzle.
  3. Rotate the dial to "Still" and hold the brew button for 7 seconds to initiate the Purge Mode.
  4. Once the purge has finished, empty the water tank.
  5. Pour 4 oz (half of the bottle) of cleaning solution into the tank, and fill it the rest of the way with fresh water.
  6. Place the tank back into the machine, and place a household container under the nozzle.
  7. The machine will pump the water in the tank, then start to chill.
  8. Rotate the dial to "Nitro" and hold the brew button for 7 seconds to initiate cleaning mode. You do not need to wait for machine to finish cooling the water before initiating the cleaning cycle.
  9. The machine will dispense all water in the machine (similar to a Purge Mode).
  10. When this is finished, indicator lights will turn off and the brew light will flash white. The capsule holder will remain locked. Empty your household container.
  11. Fill the water tank with fresh water and place it back in the machine. Press (but do not hold) the brew button to begin drawing water into the machine.
  12. Place the household container back under the nozzle.
  13. Once water has been drawn from the water tank, the machine will dispense all the water again.
  14. Repeat steps 10-13 twice more.
  15. Once finished, press and hold the brew button again for 7 seconds to exit Cleaning Mode. At this point, the capsule carrier should release.
Was this article helpful?
Yes
No